|
|
|
Your blind can be made to fit the inside of the recess of your window or
it can hang on the outside.
Exact. This measurement is required when you want your blind to hang
outside the recess. Your blind will be made to these measurements.(please
see measuring instructions)
Recess. This measurement is required when you want your blind to fit
inside the window recess. We will make the adjustment for you and your
blind will be made to fit into the recess. (please see measuring instructions) |
| measuring for recess blinds |
|
Follow these instructions if you want your blind to fit inside the
recess:
1. Measure the width of the recess from wall to wall in three
places as shown. Then take the shortest measurement as your width. |
2. Measure the drop by measuring from the top of the
recess to the window sill in three places as shown. Then take the shortest
measurement as your drop.
Note: When measuring Recess please
take note of any obstructions like Tiles, Dado Rails,
Skirting boards etc that may alter the actual width
of the recess. |
|
| measuring for an exact blind
size
|
Follow these instructions for blinds that you want to hang outside
the window recess:
1. Decide how much you want your blind to overlap and then provide
the exact measurement of the Width
you'd like your blind to be. |
|
| 2. Decide how much you want your blind to overlap
and then provide the exact measurement
of the Drop you'd like your blind to be. |
| measuring for roller blinds
|
Please be aware that on rollers blinds there is a mechanism at at one end (which controls the blind) which means the fabric is actually 35mm less than the blind size. On recess blinds you just need to provide the recess measurement as normal and we will make the adjustment, On Exact blinds decide how much you want the blind to overlap allowing extra for the mechanism. |
|
You can choose which side you would like to controls fitted, left or right hand
side of the blind as you would look at it from inside the room.
You can also choose which side the bunch should operate from i.e. Left
hand
bunch stacks to the left and draw to the right. A split bunch would
stack at both
sides and draw to the middle, as you would look at it from inside the room.
 |
perfect fit blind
|
|
1. Before you begin, ensure there is a clearance of 6mm all around the
outside of your window beading to allow enough room for the Perfect
Fit
|
| 2. Measure the width and the drop of your glass
size accurately with a digital measuring tape. We recommend that you measure
in both corners and the middle of your window and use the smallest size
taken. |
| 3. Measure the depth of the window using the depth gauge
(alternatively place a piece of wood across the frame and measure the distance
from the wood to the glass. This gives you the measurement from the face
of the window frame to the glass (this is normally 18mm/20mm/24mm) and
will determine the size of the window fixing brackets to be used. |
|
|
